Feb 17, 2017
The course was a concise and effective review of major concepts. The concepts were well explained and the lessons practical. I have a better understanding of fatigue failure as a result of this class.
Jun 12, 2017
Thank you so much. I liked your teaching style.You gave me a clear understanding about each and every topic covered in this course.I enjoyed the learning.Hope we will be in touch for further courses.
por Vivek K•
Nov 10, 2016
Enjoyable course, have to apply the fundamentals while solving problems and the instructor given the real world example of the failures and looking waiting for Machine Design part 2 and part 3.
por Prarthita M•
Apr 01, 2018
It was a great course. Thoroughly enjoyed it and got to learn a lot.
The case studies really helped in making life easier as it helped to understand the subject better.
por D S S R•
Apr 29, 2020
of course a great course and instructor made it more interesting with her delivery mechanism. thoroughly enjoyed the course. specially design for fatigue/ fluctuating stresses is very interesting . loved the questions given in assignments. well applied to the real world problems. thank you madam...hope to see you again for another course from you....
Regards: Dr. S. Solomon Raj, CBIT, Hyderabad.
por Rahul K C•
Jun 18, 2019
One of the best courses for University or college students who want to get knowledge of Machine Design and how to design a mechanical component.
por Vinay R V•
Mar 18, 2018
The professor is good in communicating the concepts. But you may need to go through the text book before you begin the course. The best part about the course is the emphasis on the examples and the real life application of Machine Design principles. The best part of the entire course is the part on fatigue. I have not seen any book that has explained the concept of fatigue so well. The course will be finished with a breeze if you have your Mechanics of Material and Mechanics of rigid bodies in good command
por pragyendra b•
Feb 01, 2019
This is really a good course for people looking basic design analysis and introduction to machine design. The examples provided are apt and really interesting, like the hip surgery and Boeing airplane testing. The references are great, I have always followed metric units but the course is neutral grounds for people so I did not find any troubles on that part. I believe more courses of this series would be fun to complete. And for everyone looking forward to this course, I would say definitely do it, it would not take much of your time and the skills you would acquire are must for knowledge prospect.
por Yohanes D•
Aug 09, 2020
This course is pretty comprehensive. It runs at appropriate speed and it is manageable for professionals like me who have full-time day jobs. The coverage is quite deep and I do learn a lot from this course. I'll upgrade to earn the certificate and I'm looking forward to Machine Design II and Machine Design III. I'm not sure what will be covered next, but it will be great if Dr. Kathryn can include some materials on traditional components (like bearings, springs etc.) and modern components (like crossed roller ways, linear-motor guides etc.). Thanks so much for the amazing course!
por Jose P C•
Oct 28, 2019
Thank you so much Dr. Wingate! It was a great course, I really enjoyed it a lot! I loved your teaching style. Your material was very clear and concise. The concepts, examples and explanations were very clear and I was able of refresh a bunch of important concepts and to learn new ones.
The topic related to Miner's rule was one of the most important for me because surely I will be able to incorporate it to my job. I am so thankful with you for shearing your knowledge by this website.
Hope I can see you later on the Machine Design Part II.
por Niklas W•
Jan 09, 2018
It's not a very "heavy" course (I completed it in 5 evenings, spent about 3-6 hrs per week, but I learned most of what's in the course several years ago - I took this mostly as a refresher - your time requirements may vary) but it is very good for what it is. If you have the basic knowledge needed prior to starting the course, e.g. a basic grasp of materials, strength/strain etc, it's a quick way to learn some methods and formulas that will be useful in real life design work. Dr. Wingate does a good job explaining it all.
por Natalia A Q•
Jun 24, 2020
Me ha parecido un curso muy interesante y para mí ha sido un reto porque nunca había realizado un curso en inglés. La profesora se ha hecho entender perfectamente en sus explicaciones. Creo que el curso está muy bien estructurado y el material que se aporta viene muy bien para luego preparar las actividades y los exámenes. Además de la transcripción de los videos, que me han servido para comprender todavía mejor cuando sólo al ver el video se me podría escapar algún concepto. Curso excelente!
por Rafay N A•
Aug 18, 2017
Amazing course, I learned a lot, my basics in mechanics of materials was honed, and I got to learn new failure theories, static and fatigue. The videos are short and to the point, the worksheets provided are really helpful to fully grasp the new concepts. The case studies brought a really new insight on the "out of the box" thinking. There wasn't a single moment during the lecture where you'll start to think that this is getting boring! I loved it! Waiting for Machine Design II and III.
Oct 23, 2018
my sincere and heartful thanks to Dr.Kathryn Wingate and coursera.
MS wingate no one has taught me like you, especially the case studies. if i should give feed back to you it would take more than a page to give my respects and it would be more than 5 star ratings .
by means if you read the comment i would be grateful if you share any research papers or articles or case studies related to machine design and its fields.
my mail id is
por Michael W•
Apr 01, 2018
I took this course to fulfill P.E. education requirements. I found that the level of detail and pace was well targeted for a practicing engineer. Without spending significant time on derivations, concepts were explained and reviewed with mathematical rigor such that they could be applied immediately on the job. I'd recommend to any engineer looking for a review of stress analysis which can be practically applied in a short amount of time.
por SHIVAM T•
Jul 19, 2017
thank you for this course. Miss Kathryn Wingate ma'am for teaching us and guide us. this course very help me in solving fatigue failure problem and also made me more confident in static as well as in fatigue problem. i personally prefer this course to every mechanical engineer. i am eagerly waiting for MD part 2 and other course from Georgia Tech. i wish Kathryn ma'am will also teach us in future.
por Syed R H•
Feb 13, 2019
Course content was good but found instructors presence in discussion forum somewhat lacking.Questions asked in the forum remain unanswered more so related to case studies.Coursera certificate design is also sub par with the instructor’s signature barely legible(only artifacts) and no watermark.Would request Georgia Inst. and coursera to at least look into the certificate aspect.
por Youssef N•
Jun 27, 2020
I extremely recommend this course to all mechanical engineering students, the course is simplified and well-organized. And thanks to Dr. Kathryn Wingate, she organized the course brilliantly and arranged the topics appropriately. I liked the way she linked theory knowledge to practical examples from her abundant experience. I really benefited from this course.
por Pulkit S•
Nov 05, 2019
An excellent course specially for the mechanical engineering students who wish to pursue their careers in the design field.Very important domain is covered in this course which is very important to know properly when ever an engineer want to design a new component or study any kind of failure in his design. Over all an excellent experience
por Eduardo d M R•
Apr 26, 2017
Very good course for beginners. Explanations are short and concise and very clear. Don't know how Part 2 is organized, but I think it would be nice to have also an introduction to CAD/CAE softwares like Inventor or SOLIDWORKS and to solve some of the examples with those softwares so people is aware of the existing numerical possibilities.
por sara s•
Dec 11, 2016
dr.kathryn is very professional and she simplify theories to perfectly understanding i become more understanding all f course contents and be more sufficient in machine design
i would to thank the doctor for her explaining
and thank georgia institude of technology for this useful course
por Santiago F H W•
Apr 16, 2017
First, I'm really thankful with your for this effort for with us. This course is really interesting, is the first course I finished. I'm mechanical engineering from Perú, I really excited with all these topics, they are great for all engineer. I recommend this course with Doctor K. Wingate, and I know that you enjoy it.
por Renato D V V•
Jun 21, 2020
This course has been really interesting and dynamic. It made me open my vision about the mechanical design and take into account many of the variables that can appear during the process. The content is perfectly explained by the teacher and the worksheets are very important to clarify the learned information.
por Jain P H•
Jun 02, 2020
I like this course very much. This course gives complete education of design of mechanical components under fatigue loading. Dr. Wingate taught this subject very nicely with the help of practical examples like Boying plane fatigue failure. My all doubts are now cleared. Thank you very much Dr. Wingate.
por Blesson S•
Oct 29, 2019
It was a great course to know about Static and Fatigue loading and failures. Well structured modules and easy to understand and gain understanding of the concepts. Thanks Georgia Tech for providing such a course and thanks to Dr. Kathryn for making it simple and interesting to learn.
por GAURAV S•
Mar 25, 2017
It was a wonderful wonderful experience. All concepts are concrete solid now, thanks to the excellent approach, way of explanation of concepts and closely developed questions that make you apply all your understanding. looking forward to enroll in further courses to offer .