And then the voltage across the capacitor is the impedance of the capacitor times

the current. Now, this current here, this is a current

going through both elements. It's the same current going through R and

C. If I want the voltage across the C, I

just multiply this current times 1 over j omega, C.

So I plug this in here and I get this expression, and now I'm going to take and

just multiply this j omega C through the denominator.

And so it cancels out this term and I get a 1, and then I get j omega C times R.

So here's the voltage across the capacitor, is equal to this factor times

the voltage driving the circuit. Now, what I want to do is compute the

magnitude of VC. So, we introduced back when we were

talking about complex numbers, we introduced the magnitude of a complex

number. So, I don't care about the phase, I just

want to know the magnitude of the voltage.

And so, the magnitude of VC over V is just the magnitude of this factor here.

And I just rewrote it as one plus j omega CR.

So, I can write this magnitude of 1 over 1 plus j omega CR is, the factor times

its complex conjugate. And I get the complex conjugate just by

changing the sign in front of the j, then I take the square root of that entire

expression. And so, if I multiply these two, then I

get 1 plus omega squared, C squared, R squared.

And the cross terms, here's plus j omega CR, and this is minus J omega CR, they

cancel. So here is the expression for the

voltage, magnitude of the voltage across the capacitor divided by the voltage

driving the circuit. So if I plot that, VC over V.

And now we're plotting this as a function of frequency.

So remember it's very, it's very important to make a distinction between

this and when we did the transient analysis of the circuit, we plotted the

response of the circuit as a function of time.

Now, we're plotting the response of the circuit as a function of frequency.

Now, I'm taking and there's I'm expressing the frequency as the frequency

divided by 1 over RC. Now RC, R times C is the so called time

constant of the circuit, it has units of time.

So if I multiply a frequency times a time, this is dimension less.

so what I'm really doing is I'm taking my frequency and I'm normalizing it by 1

over that time, that characteristic time of the circuit.

Now, this point when omega is 1 over RC, then that makes omega times RC equal to

1. And at that point, this factor, 1 over 1,

becomes 1 over 1 plus 1. So that's 1 over the square root of 2 and

that's 0.707, and that's this point right here.

So this is the frequency when omega equals 1 over RC.

The response of this circuit is down to 1 over the square root of two, times the

response at DC. So this is an example of a low pass

filter. What happens here, and it's much easier

to see here in the frequency domain than it was when we were talking about this in

the time domain. The low frequencies pass through with

very little attenuation. The voltage across the capacitor is

almost equal to the voltage driving this entire circuit.

As I, the frequency goes up, the size of the voltage appearing here across the

capacitor gets smaller. And when omega is 1 over RC, it's 1 over

the square root of 2 times this driving voltage.

when omega is much bigger than 1 over RC, the response goes down considerably.

So high frequencies do not pass through this circuit very efficiently.

Low frequencies are passed through this circuit very efficiently.

And there is a very solid connection between this and the transient analysis

we were talking about. The, at low frequencies, there's plenty

of time for this capacitor to charge up and this voltage to become quite large.

At high frequencies, there isn't enough time for the capacitor to charge up and

for this voltage to become very significant.

And so, high frequencies are attenuated by the circuit, low frequencies pass

through this circuit.