Informações sobre o curso: This course is for you if you are looking to dive deeper into Six Sigma or strengthen and expand your knowledge of the basic components of green belt level of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes and performance. This course will take you deeper into the principles and tools associated with the "Improve" and "Control" phases of the DMAIC structure of Six Sigma. It is highly recommended that you complete the "Yellow Belt Specialization" and the courses "Six Sigma and the Organization (Advanced)," "Six Sigma Advanced Design and Measure Phase," and "Six Sigma Advanced Analyze Phase" before beginning this course. In this course, your instructors will introduce you to, and have you apply, some of the tools and metrics that are critical components of Six Sigma. This course will provide you with the advanced knowledge of root cause analysis, lean tools, control plan, process control, and statistical process control (SPC) as they are associated with Six Sigma and Lean. Every module will include readings, videos, and quizzes to help make sure you understand the material and concepts that are studied. Registration includes online access to course content, projects, and resources but does not include the companion text The Certified Six Sigma Green Belt Handbook (2nd edition). The companion text is NOT required to complete the assignments. However, the text is a recognized handbook used by professionals in the field. Also, it is a highly-recommended text for those wishing to move forward in Six Sigma and eventually gain certification from professional agencies such as American Society for Quality (ASQ).
Desenvolvido por: Sistema de Universidades da Geórgia
Ministrado por: David Cook, PhD, Assistant Professor of Mechanical Engineering Technology
Department of Mechanical Engineering Technology
Ministrado por: Bill Bailey, PhD, Assistant Professor of Industrial Engineering
Department of Systems and Industrial Engineering
| Informações básicas | Curso 4 de 4 no Six Sigma Green Belt Specialization |
| Nível | Intermediate |
| Idioma | English |
| Como ser aprovado | Seja aprovado em todas as tarefas para concluir o curso. |
| Classificação do usuário |
Programa
SEMANA 1
Root Cause Analysis
In this module, Dr. Bill Bailey will cover root cause analysis, which includes the 7-step model, counter measure, and "single-minute exchange of die" (SMED). This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous belt material. This refresher area does not serve as a "replacement" for taking the material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.
12 vídeos, 5 leituras, 1 questionário de prática
- Leyendo: Highly-Recommended Text
- Vídeo: Yellow Belt Refresher Area Explained
- Vídeo: Purpose of Lean
- Vídeo: Cause and Effect Diagrams
- Vídeo: 5 Whys
- Vídeo: FMEA - pt1
- Vídeo: FMEA - pt2
- Vídeo: FMEA - pt3
- Leyendo: Introduction - Recommended Reading
- Vídeo: Introduction
- Leyendo: 7-Step Model - Recommended Reading
- Vídeo: 7-Step Model
- Vídeo: More Tools for Root Cause
- Leyendo: Counter Measures - Recommended Reading
- Vídeo: Counter Measures
- Leyendo: SMED - Recommended Reading
- Vídeo: Single-minute Exchange of Die (SMED)
- Cuestionario de práctica: Root Cause Analysis Practice Quiz
Nota atribuída: Root Cause Analysis Graded Quiz
SEMANA 2
Lean Tools
In this module, Dr. Bill Bailey will cover a more advance use of lean tools, including a look at the lean philosophy, lean goals, and lean systems. You will also be exposed to three important case studies. This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous yellow belt material. This refresher area does not serve as a "replacement" for taking the yellow belt material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.
17 vídeos, 1 questionário de prática
- Vídeo: Yellow Belt Refresher Areas Explained
- Vídeo: Poka Yoke
- Vídeo: Removing Waste
- Vídeo: Kaizan
- Vídeo: Kan Ban
- Vídeo: 5S
- Vídeo: Process Mapping - vid1
- Vídeo: Process Mapping - vid2
- Vídeo: Value Stream Mapping
- Vídeo: Total Productive Maintenance, Visual Management, & SMED
- Vídeo: Introduction
- Vídeo: Lean Philosophy
- Vídeo: Lean Goals
- Vídeo: Lean Tools & Systems
- Cuadro de aviso de la discusión: Lean as a system, not just tools
- Cuestionario de práctica: Lean Tools Practice Quiz
- Vídeo: Case Study 1
- Vídeo: Case Study 2
- Vídeo: Case Study 3
- Cuadro de aviso de la discusión: Cost Cutting vs. Lean Principles of Reducing Cost
Nota atribuída: Lean Tools Graded Quiz
SEMANA 3
Statistical Process Control (SPC) & Control Plan
In this module, Dr. David Cook will cover statistical process control (SPC) and control plan.
5 vídeos, 2 leituras, 1 questionário de prática
- Leyendo: Statistical Process Control - Recommended Reading
- Vídeo: Statistical Process Control - Part 1
- Vídeo: Statistical Process Control - Part 2
- Vídeo: Statistical Process Control - Part 3
- Vídeo: Statistical Process Control - Part 4
- Leyendo: Control Plan Recommended Reading
- Vídeo: Control Plan
- Cuestionario de práctica: SPC and Control Plan Practice Quiz
Nota atribuída: SPC and Control Plan Graded Quiz
SEMANA 4
Lean Tools for Process Control
In this module, Dr. David Cook will cover lean tools for process control.
2 vídeos, 1 leitura, 1 questionário de prática
- Leyendo: Lean Tools and Process Control - Recommended Reading
- Vídeo: Lean Tools for Process Control - Part 1
- Vídeo: Lean Tools for Process Control - Part 2
- Cuestionario de práctica: Lean Tools for Process Control Practice Quiz
Nota atribuída: Lean Tools for Process Control Graded Quiz
SEMANA 5
CAPSTONE PROJECT FOR COMPLETION OF GREEN BELT SPECIALIZATION
This module is the "capstone project." You should only complete this project if you have taken all three previous yellow belt specialization courses (Six Sigma Fundamentals, Six Sigma Tools for Define and Measure, and Six Sigma Tools for Analyze), AND you want to complete this specialization. It should be noted that completing the Green Belt Specialization does not give the learner "professional accreditation" in Six Sigma. However, successful completion will assist in better preparation for such professional accreditation testing.
1 leitura
- Leyendo: Capstone Project Module Explanation
Nota atribuída: Green Belt Capstone Project
Perguntas frequentes
Como funciona
Trabajo del curso
Cada curso es como un libro de texto interactivo, con videos pregrabados, cuestionarios y proyectos.
Ayuda de tus compañeros
Conéctate con miles de estudiantes y debate ideas y materiales del curso, y obtén ayuda para dominar los conceptos.
Certificados
Obtén reconocimiento oficial por tu trabajo y comparte tu éxito con amigos, compañeros y empleadores.
Desenvolvedores
Sistema de Universidades da Geórgia
The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System.
Custo
| Comprar curso | |
|---|---|
| Acesso aos materiais do curso | Disponível |
| Acesso a materiais valendo nota | Disponível |
| Receba uma nota final | Disponível |
| Obtenha um Certificado de Curso compartilhável | Disponível |
Classificações e avaliações
its very useful.As in Manufacturing Site the measures will be taken after the problem or defect is identified but by learning this course, we can analyse the problem before it arrives or while creating the document or the process
Excellent ! Don't hesitate go for it
O Coursera proporciona acesso universal à melhor educação do mundo fazendo parcerias com as melhores universidades e organizações para oferecer cursos on-line.
© 2018 Coursera Inc. Todos os direitos reservados.
R
The specialization gives a very good idea about lean sigma . however, it would ave been It would have been interesting if a section about service quality applications was added in each of the courses.