Chevron Left
Voltar para Sensor Manufacturing and Process Control

Comentários e feedback de alunos de Sensor Manufacturing and Process Control da instituição Universidade do Colorado em Boulder

4.6
estrelas
208 classificações
42 avaliações

Sobre o curso

"Sensor Manufacturing and Process Control" can also be taken for academic credit as ECEA 5343, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our fourth course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled "Sensors and Sensor Circuits", our second course entitled "Motor and Motor Control Circuits", and our third course entitled "Pressure, Force, Motion, and Humidity Sensors". Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. Our second and third courses give you three hands-on lab experiments using the kit. This third course assumes that you already know how to use the kit. You will learn about sensor signal characterization and manufacturing techniques and how to optimize the accuracy of sensors. You will also learn about more advanced sensors, proportional-integral-derivative (PID) control, and how this method is used to give you a closed loop sensor feedback system. After taking this course, you will be able to: ● Understand how sensor manufacturers characterize and calibrate their sensors. ● Tune a PID control loop and access the PID control function of the Cypress PSoC development kit for a motor control application. ● Understand manufacturing methods used to build electro-mechanical and micro-machined sensors. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. All are quantity one except for N107-ND where you need three, and 493-15371-ND where you need two. 428-3390-ND P14355-ND FQU13N10LTU-ND N107-ND 1N5393-E3/54GICT-ND RNF14FTD1K00CT-ND P0.62W-1BK-ND 493-15371-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

Melhores avaliações

KM
15 de Nov de 2020

Great course to learn about\n\nSensor Manufacturing and Process Control in details.I highly recommend this course and thank you all.

GQ
12 de Abr de 2021

This program is exceptional and really practical. Challenging computations in Process Control and Instrumentation .Awesome

Filtrar por:

26 — 45 de 45 Avaliações para o Sensor Manufacturing and Process Control

por Deleted A

9 de Ago de 2021

Was osm course,Thank

por Vijeth M

10 de Ago de 2021

Wonderful course

por RISHI C V

7 de Out de 2020

EXCELLENT COURSE

por Jos� R

20 de Ago de 2020

Muy buen curso

por G M M R

13 de Ago de 2021

good to learn

por Anusha A

14 de Jul de 2021

It was useful

por MD A R A

27 de Set de 2020

Excellent !!!

por ANURAG. E

21 de Out de 2020

Nice course

por Maria C L C

24 de Out de 2021

muy bueno

por S T S

22 de Out de 2021

very nice

por Muhammad S G

14 de Jun de 2021

Very good

por ESAKKIPRASATH N

5 de Out de 2021

good

por waheed k

2 de Ago de 2021

best

por Sree h

12 de Jul de 2021

GOOD

por Sangram

2 de Jul de 2021

good

por SUJITHA R

5 de Out de 2021

Its too hard to get our certificate.

por S R S

20 de Ago de 2021

good

por DINESH K G

7 de Jun de 2021

good

por Deleted A

3 de Ago de 2021

learned a lot of things

por Kenneth C

13 de Fev de 2021

Not a lot of process control, and you really need the NScope to get a functional understanding of this stuff, but Nscope is no longer sold. those videos should be updated with a product that is less likely to go away.